ゲーム攻略動画サイト

ゲームフォース

428~封鎖された渋谷で~の攻略動画

How to prime a Pontiac engine 350 400 428 455 for new start up MUST SEE GOOD INFO.

投稿日:

This is a newly rebuilt 428 Pontiac engine stroked to 487. I am priming it before the initial start up to make sure the oil is already up to all the rockers etc. I had to go buy a 1/2 inch corded drill with key chuck so I could tighten the chuck down on the shaft of the distributor and run it counter clockwise. Pontiac is opposite from Chevy. 9 amp drill and it is strong. I just took the gear off the end of the distributor that meshes with the cam so it would not interfere and slipped the spring and weight part of it off and the drill connected right to the shaft. I have "break in" oil in the engine also which is a lighter oil which makes the shaft spin more freely. Hope this helps some of you. Hotrod Ronnie.

-428~封鎖された渋谷で~の攻略動画
-

Copyright© ゲームフォース , 2024 AllRights Reserved.